Etekcity Lasergrip 1080 Handleiding (2 Pagina's) (2024)

Thank you for purchasing the Lasergrip 1080 Infrared Thermometer by

Etekcity. This easy-to-use device lets you conveniently and accurately

measure surface temperatures from a distance without the need of any

direct contact. Should you have any questions or concerns, feel free to

contact our helpful customer support team toll-free at 855.686.3835 or

by email at support@etekcity.com.

NOTE: The Lasergrip cannot measure the temperature of objects behind

glass. Inaccuracy may also occur when exposed to steam, dust or any

other contaminants in the air.

NOTE: The Lasergrip LCD will display ‘OH’ when the measured

temperature is above the measurable range, and will display ‘OL’ when the

measured temperature is below the measurable range.

NOTE: The Lasergrip cannot measure the

temperature of objects behind glass. Inaccuracy

may also occur when exposed to steam, dust or

any other contaminants in the air.

WARNING: THIS DEVICE PRODUCES LASER RADIATION. USE

CLASS 2

EXTREME CAUTION AT ALL TIMES WHEN LASER IS IN USE. DO NOT

LOOK INTO DIRECT OR REFLECTED LASER-LIGHT BEAM OR VIEW BEAM

WITH OPTICAL INSTRUMENTS. DO NOT AIM LASER-LIGHT AT ANOTHER

PERSON OR ANIMAL. LASER RADIATION MAY DAMAGE YOUR EYE. DO

NOT DISASSEMBLE THE DEVICE.

IMPORTANT: Read all of the instructions in this manual.

Failure to comply with the instructions in this manual or use

of the device, in ways other than the ones mentioned in this

manual, may result in hazardous radiation exposure.

Safety Use & Care

Features

Specications

Operation

Function Diagram

DO NOT point the laser-light at another person or animal.

DO NOT attempt to point laser-light at an aircraft.

Avoid direct/indirect eye contact with the laser-beam. Laser radiation

may cause eye damage.

DO NOT view the beam with optical instruments.

In the vicinity of use, make any bystanders aware of the dangers of

looking directly into the laser beam.

DO NOT allow children to operate the device.

Use a 9V battery when replacing the battery within the device. Make

sure to insert the battery in accordance with the correct polarities.

ALWAYS remove the batteries when cleaning the device.

DO NOT use leaking batteries or dispose old batteries in fire.

Remove battery for storage if the device is not being used for a

prolonged period of time.

DO NOT disassemble the device or tamper with internal components.

Doing so will void any warranty.

DO NOT touch the lens or wipe it using anything other than a soft

cloth or cotton swab.

Laser guided targeting for aiming precision

Narrow distance-spot ratio for accurate results at greater distances

Safely measure hazardous or inaccessible objects

Standard 9V battery powers up to 12 hours of cumulative use

Auto-off after 15 seconds of inactivity

Measurement Range: -58°F ~ 1022°F (-50°C ~ 550°C)

Accuracy: ±2% / ±2°C

Resolution: 0.1°F / °C

Maximum Output: < 1 mW

Wavelength: 630 - 670 nm

Distance-Spot Ratio: 12:1

Response Time: < 500 ms

Emissivity (Adjustable): 0.1-1.0

Battery: DC 9V

1. LCD Display

2. Unit(°C/°F)/DOWN

3. Emissivity Adjustment Mode

4. UP/Laser Pointer/Backlight

5. Measurement Trigger

6. Battery Compartment

7. Laser Hole

8. IR Sensor

1. Low Battery

2. Laser On

3. Back-light On

4. Continue Scanning

5. °C / °F

6. Temperature Result

7. Max Temperature /

Emissivity Result

8. Max Temperature Sign

9. Adjustable Emissivity Sign

1. Once the battery is properly installed, press the measurement trigger

to activate the device.

2. Point the Lasergrip towards the surface of measurement.

3. Press and hold the measurement trigger and the laser will activate for

aiming guidance.

4. Keep holding the trigger as you move the Lasergrip if you wish to live

scan the surface area for temperature measurement.

5. Once the laser is pointed to the desired point of measurement, release

the trigger and the LCD display will lock the calculated temperature.

6. Press the measurement trigger once again to make another

measurement.

Keep the thermometer away from electromagnetic fields produced by

objects such as arc welders and induction heaters.

DO NOT expose the thermometer to direct sources of heat for

extended periods of time.

The thermometer measures surface temperature, not internal

temperature. Do not use the Lasergrip as a reliable source to measure

body temperatures.

Surface Temperature Measurement

HOLD for continuous

temperature reading

RELEASE to lock the

temperature result

To switch between units of temperature

measurement, press the °C/°F button at any

time while the Lasergrip is on.

To activate and deactivate the laser, press the

laser pointer On/Off button at any time while the

Lasergrip is on.

To activate and deactivate the display backlight,

press and hold measurement trigger and then

press the display backlight On/Off button at the

same time.

To adjust the emissivity value before

measurement, press the emissivity adjustment

mode button, then use the UP and DOWM

buttons to navigate to the desired value. You

may refer to the emissivity reference chart for

correct surface emissivity values. To transfer

into Max Temperature Mode, press the mode

button again.

Unit Conversion

Laser Activation

Display Backlight Operation

Emissivity Adjustment & Max Temperature

Display Icon Key

Package Contents

1 x Etekcity Lasergrip 1080 Infrared Thermometer

1 x 9V DC Battery

1 x User Manual

Infrared Thermometer

Model No.: Lasergrip 1080

Questions or Concerns?

support@etekcity.com • (855)-686-3835

Etekcity Lasergrip 1080 Handleiding (2 Pagina's) (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Roderick King

Last Updated:

Views: 6085

Rating: 4 / 5 (71 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Roderick King

Birthday: 1997-10-09

Address: 3782 Madge Knoll, East Dudley, MA 63913

Phone: +2521695290067

Job: Customer Sales Coordinator

Hobby: Gunsmithing, Embroidery, Parkour, Kitesurfing, Rock climbing, Sand art, Beekeeping

Introduction: My name is Roderick King, I am a cute, splendid, excited, perfect, gentle, funny, vivacious person who loves writing and wants to share my knowledge and understanding with you.